4 ft. x 4 ft. PVC Slatwall

$114.99

$134.99

Save $20.00

4.8

Experience the strength, durability, and versatility of Proslat PVC Slatwall, the ultimate storage solution for your ever-changing needs. Our panels can support up to 75 lb per sq.ft and come with a lifetime guarantee, making them the perfect choice for any garage, workshop, retail display, or commercial application. PVC Slatwall installs on 16-inch stud centers. Made of 90% recycled materials, Proslat PVC Slatwall is not only practical but also environmentally friendly. Upgrade your storage system with Proslat PVC Slatwall today! Assembly required.

Color: White

White Light Gray Charcoal

Quantity:

Features:

4 ft. x 4 ft. (16 sq. ft.) includes all required trims and hardware for installation
Holds up to 75 lb. (34 kg) per square foot
Installs on 16-inch stud centers
PVC Slatwall made from 90% recycled materials
Interlocking panels – not affected by mold, mildew, or water
Installed directly to studs or over drywall into studs
Easy to clean
Can run wires behind the Slatwall to give a clean look
Panels are 2 mm thick
Lifetime warranty
Made In Canada
The Original PVC Slatwall and trims cannot be installed in conjunction with PROCORE PVC Slatwall

Includes:

10 x Single slats when installed make up 4ft W x 4ft H (16 sq.ft)
3 x +/-49 in. J trims
1 x +/-48 in. L trim
Hardware and instructions

Dimensions:

Installed dimensions: 4 ft. H x 4 ft. W

Total Coverage:

16 sq. ft. (1.5 sq. m)

Instructions:

View Instructions

Warning:

WARNING:

This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.p65warnings.ca.gov/

SKUs:

White: 88103
Light Gray: 88106
Charcoal: 88104

4 ft. x 4 ft. PVC Slatwall

$114.99

$134.99

Looks great, very easy to install and works as described.

Good enough

There was a defect with one of the uprights. It was split as if someone took a knife to it. It was small enough that I just put some painters tape over it to hold it together. It was either that or go through additional time and effort to ask for a replacement. The install process went smooth and the instructions were easy to follow. I was not happy to find that you are expected to trim down the uprights to length, though, I skipped that part. Overall, I'm happy with the product and would probably buy again.

fast service

had trouble with shipment and customer service was GREAT and FAST to reship product. proslat slat wall cannot be easier to install. love the product. this finished up the last wall of my garage with proslat.

Proslat Product and Service is great!

I ordered Proslat PVC bundle for my garage wall. Two 8' x 4' sections. Installed them with one section 8' x 5' and the one next to it 8' x 3' over the top of where my trash can sit. Worked just as I hoped and looks great.

Customer service was the best. Everything I needed was taken care of and very quickly. So much better than working through a retailer.

Not for installers. Pay attention to the color paper insert about how the slats overlap, it is an important note! An extra person just to get the bottom rail installed helps, then pretty much a one person job. And I highly recommend predrilling holes.

1 2 3

FAQ

What is the PVC Slatwall weight capacity?

PVC Slatwall can hold up to 75 lbs. per sq.ft.

What colors does PVC Slatwall come in?

PVC Slatwall is available in White, Gray, Charcoal (dark gray), and Sandstone.

Is it possible to install Proslat Slatwall on a concrete block wall?

Install Slatwall on concrete or block walls by fastening 2 x 3 in. studs vertically at 16 in. (when using PVC) or 24 in. (when using Procore, Procore+, or Aluminum) using cement screws. Use 1-1⁄2’’ #8 pan head screws (not included) to install the panels.

Does Proslat Slatwall work exclusively with Proslat accessories?

Yes, Proslat Slatwall panels are specifically designed to be compatible with Proslat hooks and accessories. This means that you can confidently use Proslat accessories with Proslat Slatwall panels, ensuring a seamless and secure fit.

What tools are required for Slatwall installation?

The tools needed for installing Slatwall typically include a measuring tape, level, drill, screws (appropriate for the wall type), and a saw for cutting panels, such as a circular saw, jigsaw, or table saw. A circular saw with a fine-toothed blade or a jigsaw with a plastic-cutting blade can provide precise cuts, while a table saw with a high-tooth-count blade can be used for straight cuts.

Can I combine PVC Slatwall with Procore, Procore+ and/or Aluminum Slatwall?

Each category of Slatwall must be installed independently, they are not made to interlock with one another.

What are the recommended cleaning methods for maintaining Proslat panels?

To clean Proslat panels, simply wipe them down with a damp cloth for regular maintenance. For larger cleaning tasks, such as an entire wall installation, the panels can be hosed down with water.

Slatwall Installation Video

PDF Instructions

4 ft. x 4 ft. PVC Slatwall

Customer Reviews

You may also like

FAQ